How to Clean a Silicone Pipe or Bong (and Get the Smell Out)
· 8 min read

Silicone pipes and bongs are hard to break, but they're not maintenance-free. Resin builds up inside where you can't see it, and silicone holds smells more than glass does, so a piece that hasn't been cleaned in a while can taste stale even when it looks fine. The good news is that silicone is easy to clean once you know which parts need which method. This guide covers how to clean a silicone pipe or bong step by step, what to use on the silicone body versus the glass bowl, how to get rid of a lingering smell, and what to avoid. It ends with what to know if you're ordering silicone pieces or cleaners from the UK, Germany, Italy or elsewhere in Europe.
Still choosing a material? Our silicone vs glass pipes comparison covers the pros and cons. This post is about keeping a silicone piece clean.
What you need
- Warm water and mild dish soap for the silicone body.
- Isopropyl alcohol (a high-strength one cleans fastest) and coarse salt for the glass or metal parts.
- A glass cleaner such as Formula 420 Original, Formula 420 All Natural or our Glass Pipe & Bong Cleaner 16 oz. Their listings name glass, metal, ceramic or quartz, not silicone, so use them on the bowl and downstem rather than the silicone body.
- Pipe cleaners for the stem, carb hole and mouthpiece.
- A zip bag or small container for soaking the bowl.
- Optional: baking soda for smells, and a freezer.
How to clean a silicone pipe or bong, step by step
1. Take it apart
Most silicone pieces come apart. Our Unbreakable Silicone Hand Pipe has a removable glass bowl, the Unbreakable Silicone Bong 8" has a glass bowl and downstem, and the Grav Octo-Taster has a glass tube that slides out of its silicone sleeve. Separate everything so the glass and the silicone can be cleaned in the way that suits each.
2. Empty and knock out the loose debris
Tip out bong water, tap out ash and old material, and give the body a quick rinse with warm water. If the bowl is clogged, poke it clear with a pipe cleaner before you soak it.
3. Freeze the silicone body (optional, for heavy resin)
Put the empty silicone body in the freezer for an hour or so. Cold resin goes hard and brittle, so when you take the piece out and flex or squeeze the silicone, a lot of the build-up cracks and flakes off. Shake it out before moving on. Skip this step for the glass parts: don't put glass in the freezer and then straight into warm water.
4. Wash the silicone with warm, soapy water
Fill the body partly with warm water and a few drops of dish soap, cover the openings and shake. Then flex the silicone and work a pipe cleaner through the stem and carb. For stubborn spots you can use a little isopropyl alcohol on the silicone too; just rinse it out very well afterwards (see step 7).
Some silicone pieces are sold as dishwasher-safe. Only use a dishwasher if the maker says so, take the glass parts out first and use the top rack.
5. Soak the glass bowl and downstem
Drop the glass parts into a zip bag or container with isopropyl alcohol and a spoonful of coarse salt, seal it and shake. The salt scrubs while the alcohol dissolves resin. For heavy build-up, let them soak for a while and shake again. A ready-made glass cleaner works the same way: pour, shake and rinse, as the Formula 420 listing describes. Our glass pipe and bong cleaning guide covers longer soaks for very dirty glass.
6. Clear the small openings
Run pipe cleaners through the downstem, the bowl's air hole, the carb and the mouthpiece. These narrow paths clog first and make a piece feel hard to pull even when the body looks clean.
7. Rinse thoroughly and let everything dry
Rinse every part with warm water until there's no soap or alcohol smell left. This matters more with silicone than glass: it's usually opaque, so you can't see whether liquid is still sitting inside. Leave the parts apart to air-dry fully before you put the piece back together and use it.
Silicone vs glass parts: what to use on each
| Part | Best cleaning method | Avoid |
|---|---|---|
| Silicone body or sleeve | Warm soapy water; freezer trick for heavy resin; isopropyl if needed, then rinse well | Sharp tools that can cut or tear the silicone |
| Glass bowl, downstem or tube | Isopropyl alcohol and coarse salt, or a glass cleaner; pipe cleaners for holes | Boiling water on cold glass; going from freezer to hot water |
| Metal bowl insert | Isopropyl alcohol soak; pipe cleaner through the hole | Leaving it wet, since it can tarnish |
| Narrow openings (carb, stem, mouthpiece) | Pipe cleaners dipped in alcohol | Forcing a thick cleaner that gets stuck |
How to get the smell out of silicone
Silicone can hold on to smoke odour, and it's often the first thing people notice. If a clean piece still smells:
- Wash it again with soap and warm water, then rinse. Often one clean doesn't get it all.
- Try baking soda. Make a paste with a little water, coat the inside, leave it for a while and rinse thoroughly.
- Air it out. Leave the parts separated in a well-ventilated spot for a day.
- Clean more often. Smell builds up between cleans, so a quick wash after a few sessions keeps it from setting in.
A faint smell in a new piece usually fades after a few washes. If it never does, glass is the more neutral material.
How often should you clean a silicone piece?
- Bong water: change it after every session. Stale water is the main source of bad smells.
- Quick rinse: every few sessions, especially for a pipe you carry around.
- Full clean: when you notice a harsh taste, a slower pull, or visible resin on the glass parts. Regular smokers often aim for about once a week.
Common mistakes
- Using a glass-only cleaner on silicone without checking. Stick to soap, water and isopropyl on the body unless a cleaner says it's suitable for silicone.
- Not rinsing enough. Leftover alcohol or soap ruins the taste and you can't see it inside opaque silicone.
- Lighting the silicone. Silicone pieces have glass or metal bowls for a reason. Keep the flame on the bowl, not the body.
- Putting it back together wet. Trapped moisture keeps smells around. Let everything dry apart.
Storing a clean silicone piece
Once it's dry, keep the silicone body and the glass bowl together in a case or bag so the bowl doesn't get lost or chipped. A smell-proof bag with a lock or the smell-proof travel kit keeps odour in and the piece away from children. Our guide to storing glass pipes and bongs covers packing pieces for travel.
Ordering silicone pieces and cleaners from the UK, Germany, Italy or the EU
Silicone pipes, bongs, cleaners and other accessories ship from us to the United Kingdom and every EU country, including Germany and Italy. Before you order:
- Shipping is a flat $300 USD per order to the UK or any EU country, however many accessories are in the cart. It's added at checkout, so you see the full total before you pay. Product prices don't include it.
- Every order needs at least $150 of items, counted before discounts and shipping. A silicone pipe and a bottle of cleaner on their own won't reach that, so many buyers combine them with a grinder, glass or rolling gear.
- UK orders need more than £135 of items, after any discount and not counting shipping. Checkout converts the item total from US dollars to pounds and won't accept a smaller UK order.
- We don't collect UK VAT or EU import VAT at checkout. On UK orders, import VAT and any duty are collected by the courier from you on delivery. EU orders may have VAT, import duty or courier fees to pay on delivery.
- Only accessories ship to the UK and EU. Hemp and other cannabinoid products ship to eligible US addresses only.
Rules on smoking accessories differ by country, so check where you live. Our are bongs legal? guide covers the UK and Germany, and the international shipping page has the full details. Browse cleaners and spare parts on our accessories page.
FAQ
Can you clean a silicone bong with alcohol?
Yes. Isopropyl alcohol is fine for a silicone bong or pipe, but rinse it out several times with warm water and let the piece dry fully, because silicone is usually opaque and you can't see leftover alcohol inside. Warm soapy water is enough for routine cleaning.
Can you put a silicone pipe in the dishwasher?
Only if the maker says it's dishwasher-safe. Take out the glass bowl and any downstem first, and use the top rack.
How do you get resin out of a silicone pipe?
Freeze the empty silicone body for about an hour, then flex it so the hardened resin cracks off. Shake out the flakes, wash with warm soapy water and run pipe cleaners through the stem and carb.
How do you get the smell out of a silicone bong?
Wash it again with soap and warm water, coat the inside with a baking soda paste for a while and rinse, then let the parts air out separately. Changing the water after every session stops the smell from building up.
Do you ship silicone pipes and cleaners to the UK, Germany and Italy?
Yes. Silicone pieces, cleaners and other accessories ship to the UK and all EU countries, including Germany and Italy, for a flat $300 USD per order, added at checkout. Every order needs at least $150 of items, and UK orders need more than £135 of items, excluding shipping.
Adults 21+. Accessories are sold for legal use with tobacco or legal herbs. Keep cleaners, alcohol and smoking accessories away from children and pets. Local laws on accessories differ by country; check yours before ordering.
— The Shop Kushina Team
Ready to order?
Browse the full menu or THCA flower. Questions? Call or text (507) 323-2528.
More guides
Follow Shop Kushina on Google