Call / text (507) 323-2528
KUSHINACart

How to Read a THCA COA (Lab Report) in 2026

· 4 min read

A certificate of analysis (COA) is the lab report behind a batch of hemp flower or extract. It is the closest thing a buyer has to proof of what's in the bag, and after December 11, 2026 it matters even more, because the federal hemp definition will depend on total THC instead of delta-9 THC alone. Here is how to read one in five minutes, line by line.

What a COA is (and isn't)

A COA is a report from a testing laboratory for a specific sample of a specific batch. It is not a brand certificate, and it does not cover the whole product line. A trustworthy COA has:

  • The lab's name, address and, ideally, its accreditation (look for ISO/IEC 17025)
  • A sample ID or batch/lot number that matches the product you're buying
  • The dates the sample was received and tested
  • A signature or authorization by the lab's director or analyst

If any of those is missing, treat the report with caution and ask the seller for the full PDF.

Step 1: Match the batch

Check that the strain name and the batch or lot number on the COA match the listing. A beautiful report for a different batch tells you nothing about the jar in front of you. If the seller can't connect the two, that's a red flag.

Step 2: Check the date

Cannabinoid levels change slowly as flower ages, and a report from years ago may not reflect today's lot. A recent test date is a good sign. Compare the test date with the harvest or packaging date if one is listed.

Step 3: Read the cannabinoid panel

This is the table most people skip to. Typical rows:

RowWhat it means
THCATetrahydrocannabinolic acid, the non-intoxicating acid form that becomes THC when heated
Δ9-THCDelta-9 THC already present in the sample
Total THCUsually calculated as Δ9-THC + (THCA × 0.877)
CBDA / CBDAcid and neutral forms of CBD
Total cannabinoidsThe sum of all cannabinoids measured

The figure 0.877 accounts for the weight lost when THCA converts to THC (the acid group comes off as carbon dioxide). If a report lists only THCA and Δ9-THC, you can work out total THC yourself:

Total THC ≈ Δ9-THC + (THCA × 0.877)

Example: 0.2% Δ9-THC and 22% THCA → 0.2 + 19.3 = about 19.5% total THC.

Why that number matters in 2026

Until December 11, 2026, federal hemp is defined by Δ9-THC at or under 0.3% dry weight, which is why THCA flower with a low Δ9 reading can be sold as hemp in some states. From December 11, federal law counts total THC (including THCA) against that same 0.3% limit, so most high-THCA flower will no longer qualify. Several states already apply a total-THC test. See the THCA shipping-by-state guide and our December 2026 law-change explainer.

Step 4: Units and "dry weight"

COAs report results as a percentage (%) or as mg/g. 1% = 10 mg/g. The hemp limit is measured on a dry-weight basis, so a good report shows moisture content or states that results are dry-weight corrected. "ND" means not detected, and "LOQ" is the limit of quantitation, the smallest amount the method can reliably measure.

Step 5: Look for safety panels

A full-panel COA goes beyond potency. Look for:

  • Pesticides: a pass/fail table against the lab's action limits
  • Heavy metals: lead, arsenic, cadmium and mercury
  • Microbials: yeast, mold, E. coli and Salmonella
  • Mycotoxins: aflatoxins and ochratoxin
  • Residual solvents: for extracts and concentrates
  • Moisture and water activity: flower that is too wet can grow mold

Not every hemp flower COA includes every panel. A potency-only report is common, so note what was and wasn't tested.

Step 6: Terpenes (optional but useful)

Some COAs list terpenes such as myrcene, limonene, caryophyllene and pinene. They help predict aroma and flavour. A high terpene total often lines up with a loud nose, which is also why top-grade flower tends to test well here.

Red flags

  • No lab name, no batch number or no date
  • Results that look edited, with fonts or alignment that don't match
  • A QR code or link that doesn't go to the lab's own site
  • Total THC missing when THCA is high
  • Identical numbers across many different strains

Asking for a COA

If a listing doesn't show the report, ask before you buy — call or text (507) 323-2528 or email sales@shopkushina.com with the product name. Then compare strains on the THCA flower menu. Orders are for adults 21+.

Shopping CBD instead? Compare hemp CBD gummies, oils and topicals.

FAQ

What does COA mean for THCA flower?

COA stands for certificate of analysis: a lab report showing the cannabinoid content, and sometimes the safety testing, for a specific batch.

How do I calculate total THC from a COA?

Total THC ≈ Δ9-THC + (THCA × 0.877). For example, 0.2% Δ9 and 22% THCA works out to about 19.5% total THC.

Why does total THC matter after December 11, 2026?

From that date the federal hemp definition counts total THC, including THCA, against the 0.3% dry-weight limit, so most high-THCA flower will no longer qualify as hemp.

What does ND mean on a lab report?

ND means "not detected": the compound was below the level the lab's method can detect.

Ready to order?

Browse the full menu or THCA flower. Questions? Call or text (507) 323-2528.