Call / text (507) 323-2528
KUSHINACart

How to Grind Weed Without a Grinder: 6 Methods Ranked

· 5 min read

Open metal herb grinder with ground plant material inside

No grinder? You can still get a usable grind with things you already have in the kitchen. Some methods are nearly as good as a grinder; others are a last resort. This guide ranks six common methods, explains how to do each one, and covers when it's worth just buying a grinder. It's written for US adults 21+.

Why grind at all?

Breaking flower into small, even pieces helps it burn or heat evenly. In a joint or cone, an even grind packs without lumps and is less likely to run or "canoe". In a bowl, it lets air flow through. In a dry herb vaporizer, it exposes more surface area to the heat. You don't need a perfect grind, just pieces that are fairly even in size and free of stems and seeds.

The methods at a glance

MethodGrindSpeedBest for
Scissors in a shot glassMedium, evenFastJoints, bowls
Kitchen scissors aloneCoarse to mediumMediumBowls, quick fixes
Knife and cutting boardMedium to fineSlowJoints, vapes
By handCoarseFastBowls only
Spice or coffee grinderFine (easy to overdo)Very fastLarger amounts
Pill bottle and a coinCoarse to mediumMediumOn the go

1. Scissors in a shot glass (best overall)

This is the closest thing to a real grinder.

  1. Put a small amount of flower, about a gram or less, into a shot glass or a small, sturdy cup.
  2. Point clean scissors straight down into the glass and snip repeatedly, turning the glass as you go.
  3. Tip it out, check for big pieces, and give those a few more snips.

The glass keeps everything contained, and the pieces come out fairly even. Sharp scissors with long, thin blades work best. Wipe the blades with isopropyl alcohol afterwards, because resin builds up quickly.

2. Kitchen scissors alone

Hold a bud over a rolling tray or a sheet of paper and snip it into small pieces. It's quicker than a knife but less even than the shot-glass method. It's fine for a bowl; for a joint, trim any larger pieces again.

3. Knife and cutting board

  1. Pull the bud apart into small pieces first.
  2. Use a sharp knife and a rocking motion, like chopping herbs, until the pieces are the size you want.
  3. Scrape the knife and board onto a tray or paper so you don't lose anything.

This gets a fine, fairly even grind, but it's slow and sticky. Dry flower chops more cleanly than moist flower. Use a board you can wipe clean, or a sheet of parchment paper on top of it.

4. By hand

Break the bud apart with your fingers, removing any stems as you go. It's quick and needs no tools, but the grind is coarse and uneven, and resin ends up on your fingers. It works for a bowl in a pinch. It's the hardest way to roll an even joint.

5. Spice or coffee grinder

A blade grinder works very fast, which is also its weakness: a few seconds too long and you get dust that falls through a bowl or burns too fast in a joint. Use short pulses of one second or less and check after each one. Use a grinder you keep only for this, or clean it thoroughly first, because coffee and spice flavors carry over in both directions.

6. Pill bottle and a coin

Put a few small pieces and one or two coins in an empty, clean pill bottle, close the lid and shake hard for a minute or two. The coins break the flower into smaller pieces. It's crude but works when you're away from home. Wash the coins first.

Tips for any method

  • Remove stems and seeds first. They don't grind well and can poke through papers.
  • Match the grind to the method. Medium for joints and bowls, medium to fine for most dry herb vapes. See our how to pack a bowl and how to roll a joint guides.
  • Overly dry flower turns to powder. Moist flower clumps and gums up blades. Storing flower properly helps with both; our storage guide explains how.
  • Work over a tray. A rolling tray catches the bits that fly off.

When to just buy a grinder

If you grind more than once in a while, a grinder saves time, gives a more consistent result and keeps resin off your fingers and kitchen tools. A 4-piece grinder also collects kief in its bottom chamber. Options in our range include:

Our grinder buying guide compares sizes, materials and 2-, 3- and 4-piece designs, and how to clean a grinder keeps one turning smoothly. Browse them all on our grinders page.

FAQ

What is the best way to grind weed without a grinder?

Scissors in a shot glass. Snip straight down into the glass, turning it as you go, and you get a fairly even, medium grind with little mess.

Can you use a coffee grinder to grind weed?

Yes, but use very short pulses and check after each one, or it turns to powder. Keep a separate grinder for it, or clean it well first, because flavors carry over.

Is it OK to break up weed by hand?

It works for a bowl in a pinch, but the grind is coarse and uneven, and it leaves resin on your fingers. It's the hardest way to roll an even joint.

How fine should weed be ground for a joint?

A medium grind: small, even pieces that are fluffy rather than powdery. Too fine and the joint burns fast and harsh; too coarse and it burns unevenly.

Do I need a grinder for a dry herb vaporizer?

Not strictly, but most vaporizers heat more evenly with a medium to fine, consistent grind. The knife or shot-glass methods work if you don't have a grinder.

Adults 21+. Educational content. Hemp products ship to eligible US addresses only.

— The Shop Kushina Team

Ready to order?

Browse the full menu or THCA flower. Questions? Call or text (507) 323-2528.