How to Roll a Cone: 2 Easy Methods for a Cone-Shaped Joint
· 7 min read

A cone is a joint that's narrow at the filter end and wider at the far end. Pre-rolled cones are shaped that way at the factory, but you can roll the same shape yourself from any rolling paper. Cones are popular because the wide end lights easily and holds a bit more, and the narrow end keeps the draw comfortable. This guide covers two ways to roll a cone by hand, how to make a tip for one, how much to fill it, and how to fix the usual problems. It also covers ordering rolling gear from the UK, Germany, Italy or the EU.
If you've never rolled anything, our step-by-step how to roll a joint guide explains the basic tuck-and-roll motion. This post builds on it for the cone shape.
What you need
- A rolling paper. King size slim papers make the classic long cone; 1¼ papers make a shorter one. See rolling paper sizes explained and the cone table in our smoking accessory size chart.
- A tip (filter or crutch). A strip of thin card such as unbleached filter tips, or a reusable glass tip. The tip sets the narrow end of the cone, so it matters more here than in a straight joint.
- Ground herb, a medium grind. Too fine and it packs into a dense plug; too chunky and the cone burns unevenly.
- A flat surface, ideally a rolling tray, so nothing is lost.
- Something thin to pack with, like a pen, a chopstick or a cone poker.
Method 1: Roll an empty cone, then fill it
This is the easiest way for beginners because you shape the paper first and fill it afterwards, exactly like a pre-rolled cone.
- Make the tip. Fold a few small accordion folds at one end of the filter strip, then roll the rest around them. Keep it about as wide as a pencil, or slightly narrower for a slim cone.
- Hold the paper glue strip up, facing you, with the tip at the left or right end, resting on the bottom edge.
- Roll the paper around the tip at an angle. Start rolling at the tip end so the paper wraps tightly around it, and let the paper fan out wider towards the far end. You're making a hollow funnel shape with the paper itself.
- Lick and seal the glue strip, starting at the tip end and working towards the open end, pressing as you go.
- Fill from the open end. Add ground herb a little at a time, tapping the cone filter-end down on the tray and pressing gently with your pen after every few pinches. Leave a few millimetres of empty paper at the top.
- Twist the top closed so nothing falls out before you light it.
Method 2: Shape the cone with the herb in the paper
This is the classic hand-rolled method, closer to rolling a normal joint.
- Place the tip at one end of the paper, glue strip up and facing you.
- Spread the herb unevenly on purpose: a thin line near the tip, getting fuller towards the far end. This uneven fill is what gives the cone its shape.
- Pinch and roll the paper back and forth between your thumbs and fingers so the herb forms a wedge, narrow at the tip and wide at the far end. Spend more time on this step than you think you need.
- Tuck the near edge of the paper under the herb, starting at the tip end where it's tightest, then work the tuck along the length at an angle.
- Roll up and seal. Roll the paper upwards until only the glue strip shows, lick it lightly, and seal from the tip outwards.
- Pack and twist. Tap the cone filter-end down, press the open end with your pen to settle the herb, top it up if needed and twist the end.
How much goes in a cone?
It depends on the paper size and how tightly you pack it. As a rough guide from our size chart, a 1¼ cone holds about 0.5–0.75 g and a king size cone about 0.75–1.25 g. Hand-rolled cones vary more than pre-rolled ones, so use these as a starting point rather than a rule.
Common problems and fixes
| Problem | Likely cause | Fix |
|---|---|---|
| Paper won't hold a cone shape | Rolling straight instead of at an angle | Start the roll tight at the tip and let it fan out; try Method 1 |
| Burns down one side (canoeing) | Uneven packing, or lit from one side | Pack evenly and turn the cone while lighting the whole end |
| Hard to draw | Packed too tight near the tip, or the tip is too narrow | Pack more loosely near the filter; make a slightly wider tip |
| Keeps going out | Packed too loose, or herb too dry or chunky | Pack a little firmer; use a medium grind |
| Seam opens up | Too much saliva, or sealed from the wrong end | Lick lightly; seal from the tip end outwards |
| Too much paper at the end | Overlap too big for the amount of herb | Tear off excess paper above the glue line before sealing, or use a smaller paper |
Shortcuts if hand-rolling isn't for you
- Pre-rolled cones: already shaped, just fill and twist. Try King Size Pre-Rolled Cones (50 pack) or RAW Classic 1¼ cones. Our how to fill a pre-rolled cone guide covers technique.
- Cone fillers: a cone filler and pre-roll loader or the RAW Six Shooter fills several cones at once.
- Rolling machines: these roll straight joints rather than cones, but they're a quick alternative. See how to use a rolling machine.
Which paper is best for cones?
Thin papers are easier to shape into a cone because they fold tightly around the tip. Popular choices include RAW Classic King Size Slim, Elements Ultra Thin Rice King Size Slim and OCB Organic Hemp. Our hemp vs rice vs wood pulp papers guide explains how materials differ in burn and grip.
Ordering rolling gear from the UK, Germany, Italy or the EU
Rolling papers, cones, tips, trays and grinders ship from us to the United Kingdom and every EU country, including Germany and Italy. Before you order:
- Shipping is a flat $300 USD per order to the UK or any EU country, however many accessories are in the cart. It's added at checkout and isn't included in product prices.
- Every order needs at least $150 of items, counted before discounts and shipping. Papers and tips are inexpensive, so rolling gear is usually combined with a grinder, tray or glass in one order.
- UK orders need more than £135 of items, after any discount and not counting shipping. Checkout converts the item total from US dollars to pounds and won't accept a smaller UK order.
- We don't collect UK VAT or EU import VAT at checkout. On UK orders, import VAT and any duty are collected by the courier from you on delivery. EU orders may have VAT, import duty or courier fees to pay on delivery.
- Only accessories ship to the UK and EU. Pre-rolls and other hemp or cannabinoid products ship to eligible US addresses only.
Europe isn't one market, so check the rules where you live before ordering. Full details are on our international shipping page.
FAQ
How do you roll a cone joint?
Make a tip, place it at one end of the paper and either roll the empty paper into a cone around the tip and fill it afterwards, or spread the herb thin near the tip and fuller at the far end, then tuck, roll and seal at an angle.
What is the easiest way to roll a cone?
Roll the empty paper into a cone around the tip first, seal it, then fill it from the open end and pack it with a pen. It works just like filling a pre-rolled cone.
What size paper is best for a cone?
King size slim papers make the classic long cone, and 1¼ papers make a shorter one. Thin papers fold more tightly around the tip, which makes the cone shape easier.
Why does my cone burn on one side?
Usually because it's packed unevenly or lit from one side. Pack the herb evenly and rotate the cone while lighting so the whole end catches.
Do you ship rolling papers and cones to the UK, Germany and Italy?
Yes. Rolling papers, cones and other accessories ship to the UK and all EU countries, including Germany and Italy, for a flat $300 USD per order. Every order needs at least $150 of items, and UK orders need more than £135 of items, excluding shipping.
Adults 21+. Accessories are sold for legal use with tobacco or legal herbs. Rolling your own doesn't make smoking safe. Local laws on accessories differ by country; check yours before ordering.
— The Shop Kushina Team
Ready to order?
Browse the full menu or THCA flower. Questions? Call or text (507) 323-2528.
More guides
Follow Shop Kushina on Google